Month: August 2020

In any process plant, the gate valve contains the most common use and therefore are suitable for both above-ground and underground installations. A gate valve at stvvalves is usually known as a sluice valve. It is very all to easy to open it, one just need to lift the gate out on the path on…

The ball valve design features a hollowed-out ball that acts because disc that enables the flow of media. Mostly for non-slurry applications, ball valves like dual wafer check valve can also be suited for applications which require tight shut-off. The quick opening and closing on the ball ensure it is important in some applications which…

The parallel gate valve utilizes a flat disc gate between two parallel seats, upstream and downstream. Shut-off is obtained from the free-floating seat or disk gate encourage the upstream pressure to seal the seat and disk against any Gate Valve at stvvalves.com/ unwanted seat leakage. Some parallel gate valves are designed to let the seat…

Gate valves and knife valves are advantageous in applications involving slurries, for their “gates” can reduce right through the slurry. They are also found in applications which involve viscous liquids including heavy oils, light grease, varnish, molasses, honey, cream as well as other non-flammable viscous liquids. They can be found in large sizes to improve…

The open/close flow is achieved by moving the gate into or out of the fluid-flow stream. The flow on the fluid over the valve might be in either direction. Gate Valve like stainless steel sight glass is often used in refineries and petrochemical plants where pressure is low, and less utilised in upstream facilities because…

A gate valve at https://stvvalves.com/ is really a linear motion valve currently in use to start or stop the flow from the fluid in piping. There can be a gate or wedge type disk which moves perpendicular on the flow which directs the flow to halt or start. In any process plant, the gate valve provides the…